5125 ANL Fuse 100A - Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats - Silver-plated connector blades for corrosion resistance - Visible indication of blown condition - 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks - For use with Blue Sea Systems ANL Fuse Blocks, Solid brass construction for strength and conductivity, simulated platinum finish for long lasting protection from corrosion and tarnish. The P3 fused power distribution blocks accept AGU style fuses and encloses them in a waterproof clear plastic cover. Three 4 ga. inputs and four fused 8 ga. outputs. Dimensions: 4" L x 3-3/8" W x 1-1/4" H. Fuses sold separately.

5003 ANL 750 Fuse Block - 750 Amperes rating achieved with large heat dissipating tin-plated copper mounting blocks - Clear insulating cover satisfies ABYC/USCG requirements - For use on systems up to 32 Volts DC - Large terminals accept 5/16" or M8 ring terminals up to 4/0 AWG - Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction - For use on systems up to 32 Volts DC - Large 5/16"-18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire, 5030 ST Blade Fuse Block w/out Cover - 6 Circuit w/ Negative Bus - Clear insulating cover with label recesses accept Small Format Labels - Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit - Accepts ATO and ATC fast acting blade fuses.