Designed for flybridge and open cockpit applicationsConstructed from corrosion resistant materialsIndependent label backlighting circuit for remote switching and dimmingCompatible with all Blue Sea Systems Digital DimmersUV stabilized and weather resistant faceplateRated IP67 - "Temporary Immersion"Rugged UV stabilized waterproof boots protect toggle switchesEach panel can be mounted in four different orientationsAvailable in 2, 4, 6, and 8 circuit modelsIntegrated ATO/ATC fuse based circuit protection Specifications Water Resistant IP67-"Temporary Immersion" Material UV Resistant Thermoplastic Maximum Voltage 12 Volts DC Amperage Rating per Circuit 15 Amperes Switch Type ON/OFF Toggle Switch Rating 15 Amperes Maximum Backlight Voltage 12 Volts DC Nominal Backlight Current 10mA per Circuit Fuse Type ATO/ATC Automotive Blade-Type Fuses Installed 15 Amperes per Circuit Fuses Available 1-40 Amperes Height 4.30" (109.20mm) Width 3.88" (98.40mm)

The AP-1's compact size (3.0 x 2.4 x 1.25) allows for easy installation. Once the fuse panel is mounted, you simply attach the positive and negative wire between the power source (battery or relay) and the heavy power studs on the panel. This will allow the AP-1 to supply safe, fused power for up to eight individual electronic devices, including radio, GPS and other accessories up to 60 amperes.Adding your accessory is as simple as routing your power wiring from your device to one of the "eight positive and grounding lugless termial strips" on the AP-1. Our "lugless" terminal strips require you to strip off a small amount of wire insulation and insert the copper wire into the opening under the retaining screw. No additional fasteners are needed.Manufactured using only high quality materials such as plated contacts and stainless steel hardware, the water resistant AP-1 fuse panel will provide reliable service no matter your application.The fuse panel utilizes ATC type fuses that do not spark when blown while the built-in grounding system ensures that the electrical system works properly and safely at all times.