Isolation transformer and auto-transformer are important component parts in various power supply and electric appliance, We have applied advanced technological process for transformer manufacture, such as Arrangement wire winding without bobbing, the whole transformer is impregnated under vacuum-pressure up to insulation class F or H. The input and output voltage can be designed as required. There are various dry-type transformer of single phase or three phase with delta, Y and Yo connection or special for multi-input or output is available. The dry-type transformer have been designed and produced by our factory for 20 years. It is suitable used for electric circuit of AC 20Hz to 400Hz and voltage below 1000V, and is wide used in electric appliance for light, lift, machinery, medicine device, electro plating, rectifier and power supply etc. The specifications can be designed and satisfied for custom's special requirement.
Features and benefits:
High level of isolation
High quality neutral-ground bond
High level of common-mode noise rejection
Conversion from Delta to Wye or the other way around
Easy to change voltage taps
Custom design for specific system

Lite Source TR60SCBLK 60W electronic transformer with auto stop. Features: -Black finish -Auto stop About Lite Source Lite Source manufactures a beautiful selection of high quality accent lamps. From novelty lamps in unique styles to standard desk and floor lamps, a purchase from Lite Source will be a long-lasting addition to any decor and for any application. Auto Transformers are used in applications with no requirements for isolation between the input and output windings. Due to this construction they are physically smaller than isolation transformers.
Linear Magnetics Standard Auto Transformers are made for voltage step up or step down. The Transformers are provided with a single winding and are designed for ambient temperature of 40°C.
The transformers are normally supplied with one metal disk and two rubber washers for simple and easy one screw mounting (type-R). The transformers can be encapsulated in a black cylindrical plastic enclosure for attractive appearance and mechanical protection (type-TD). When vertical mounting is preferred, the transformers can be supplied with square mounting and screw terminal blocks (type-MK).