Powered by China Products(Top Trade Directory of China Products and Manufacturers) and China Manufacturers(Top China Manufacturers Directory) 网络营销, 网站推广
Products List
Contact Us

E-mail:
sales@capacitor-china.com
Solar water heater
solar panel
Products >> audio capacitor
Founded in 1993, China Panfeng Electronics is professional audio capacitor manufacturer and supplier specializing in developing and producing all kinds of electrical products and accessories. As an enterprise certified by ISO9001 system strictly, we have also got many safety certificates, such as CB, SEMKO, FIMKO, ESC, CCC, VED, UL, CE etc. We have great capacity to develop new audio capacitors products, plastics and mental products according to our clients.
>> Products Show
>> audio capacitors show
audio capacitor
Manufactured to the Highest Quality Available.
With True Enhanced Performance.
Latest Technical Development.
PRODUCT FEATURES:Improves sound quality - cleaner mids and highsPlatinum platedSolid brass top helps reduce stripping. Manufactured to the Highest Quality Available. With True Enhanced Performance. Latest Technical Development. Adapts to single - phase asynchronous motor and three - phase asynchronous
motor, which is supplied with single - phase power and the frequecy is blew 100Hz . Specially used for supplying leading current for electromotor, and then the electromotor is actuated with the adequate moment consequently
When the electromotor runs smoothly, the capacitor will disconnect from the circuit. The product possesses stable capacity and long relative runtime. Rated voltage: 16~500V. Rated frequency: 50 / 60Hz. Insulation: between terminal 1.2Un, 2 seconds, none over; between pole and shell, 2 seconds, 2kV, none over. Capacity range: 20~1000uF.
Tangent of loss angle: less than 0.15. Outlet line: the section area is greater than 0.5mm
audio capacitors
This is for one Stinger HPM Capacitor with Installation Kit. Features an exclusive HPM 1 farad capacitor with built-in 4-digit red voltmeter and blue strobe affect LEDs. Unique distribution block enables easy installation even with an existing amplifier install, just cut power and ground and insert the distribution block. Block provides the necessary 4 gauge outputs for the capacitor. Comes complete with 1 Farad HPM capacitor with monitor, power and ground distribution block (SPGDPT), four feet of 4 gauge blue power wire, four feet of 4 gauge silver ground wire, two preassembled 4 gauge ring terminals. The CAP 4M features Blue LEDs that continously display system voltage and amperage. If a low battery voltage or over voltage limit is determined, the capacitor will issue an audible warning. If the capacitor senses a current fluctuation of more than 2 3 amps it will flash in the Blue LEDs. Installing the CAP 4M with reversed polarity will also issue an audible warning for 45 seconds. For the most demanding systems we have the CAP 18 HD, a hybrid design that yields a staggering amount of power on demand yet retains a small physical footprint and an affordable price.
Electric Products
Search More Products: